“UL阻燃黄胶代替韩国1603黄胶”参数说明
是否有现货: | 是 | 认证: | UL |
材质: | 树脂 | 类别: | 粘接 |
形态: | 胶液 | 应用: | 电子元件 |
型号: | 1618 | 规格: | 100ML 4 15 |
商标: | 科达斯 | 包装: | 4公斤/桶 |
“UL阻燃黄胶代替韩国1603黄胶”详细介绍
1618电子定位黄胶
此胶粘剂是为各种电子机械的零件固定及接著所开发,其皮膜干燥后具有难燃的氯丁胶系列接著剂。
特性/GENERAL BROPERTIES:
化学反映特性/Reactivity data
剥离强度 / Peeling pr0perties Electroplating iron/canvas
-Relationship between standing time after application and adhesive strength peel strength kg/in
MarkΔ:arart of canvas destroy ×: Canvas destroy-Adhesive strength in various temperature atmospheres
Condition.Substrates: steel/canvas.Measurement after standing for 48 hours at 25℃在25℃时的胶体完全固化的时间为48小时..Peeling angle:180℃.peeling speed:50mm/min包装、保质期及其存储注意事项/Packaging ,shelf life storage /regulations
注意事项Warning附注:※ 使用注意事项:
1. 此接著剂为溶剂型胶粘剂,因此胶粘剂在未完全干燥前具有可燃性,故作业时周边应杜绝明火。
2. 此接著剂中所使用的溶剂(如丁酮)对某此塑料如PVC、PE、PP等有一定的溶解和腐蚀性,因此在涂布粘著时应尽量避开此类材质的粘接;亦不适用于作导电、导热性元件的固定粘接。
3. 使用时用点胶机或胶壶将胶挤出涂于需固定的元器件与PCB结合处,涂布量以胶不溢出PCB面为宜。为防止此胶粘剂的溶剂过分挥发,造成品质不良,对使用未完的胶粘剂应密封保存于阴凉处;未使用的胶粘剂应避免阳光直射保存
此胶粘剂是为各种电子机械的零件固定及接著所开发,其皮膜干燥后具有难燃的氯丁胶系列接著剂。
特性/GENERAL BROPERTIES:
外观:Appearance | 黄色糊状:Paste/yellow-colored |
比重:Specific gravity | 1.47 |
粘度:Viscosity at 25,5rpm | 40~55pa.s(40,000cps~55,000cps) |
固含量:Solid content | 44.5+/-1.5 |
绝缘阻抗:Sir (Ω) | 2.0´1010 |
初期干燥阻抗 Origind Dry Sir | 1.0´1010W/mm |
吸水率/Absorb Water Rate | 24小时<0.01% |
延升率/Elongation | 300 |
介电常数/Dielectric Constant | 1MHZ3.44 |
耐热性/Heat-resistant | 100℃500小时未碳化(建议在80℃以下使用) |
破坏电压/Destroy Voltage | 23KV/MM |
化学安定性/Chemical stabilityh | 安定/Stable |
有害之聚合物/Hazardous polymerization | 无/Will not occur |
应避免之状况/Condition to avoid | 避免火花或过热/Flame spark or extreme避免在发热元器件上固定及粘接 |
Time | 3 hours | 24 hours | 48 hours | 120 hours | 168hours | 软化点/Softening point | 热老化/Heat ageing |
kg/25mm | 2.5 | 7.8 | 9.9 | 13.2 | 14.8 | 150℃ | 13.8 |
|
After 2 days | After 10 days | After 1 month | After 3 months | After 6 months | After 1 year | After 2 years | After 3 years | After 5 years | After 7 years |
Indoor | 9.6 | 11.3 | 11.5 | 11.6 | 11.8 | 11.8 | 11.6 | 11.6 | 11.3 | 10.8 |
outdoor | 9.8 | 10.5 | 10.0 | 10.0 | 9.5Δ | 9.2Δ | 8.6× | 8.4× | 8.2× | 8.0× |
Temperature℃ | -40 | -20 | 0 | 20 | 40 | 60 | 80 | 100 |
Peeling strength | 11.2 | 12.5 | 11.1 | 9.6 | 7.0 | 5.4 | 3.3 | 2.7 |
包装方式Packaging | 100ML/支 4KG/罐、15KG/罐 |
保质期Shelf life | 保质期伍个月1618 industrial adhesive has a shelf life of six months from date of shipment |
储存注意事项Storage ergulations | 应保存于阴凉干燥的地方及不用时保持密封。Store in the cool dry place and keep container closed when not in use. |
1. 此接著剂为溶剂型胶粘剂,因此胶粘剂在未完全干燥前具有可燃性,故作业时周边应杜绝明火。
2. 此接著剂中所使用的溶剂(如丁酮)对某此塑料如PVC、PE、PP等有一定的溶解和腐蚀性,因此在涂布粘著时应尽量避开此类材质的粘接;亦不适用于作导电、导热性元件的固定粘接。
3. 使用时用点胶机或胶壶将胶挤出涂于需固定的元器件与PCB结合处,涂布量以胶不溢出PCB面为宜。为防止此胶粘剂的溶剂过分挥发,造成品质不良,对使用未完的胶粘剂应密封保存于阴凉处;未使用的胶粘剂应避免阳光直射保存